11 SERVICE WORK ON THE CHASSIS 46
H01430-11
Main work
(50 SX)
–
Push splash protector
to the side.
–
Position the shock absorber with screw
, depending on the desired seating
height.
–
Raise the swingarm; position the shock absorber with screw
.
H01429-11
–
Mount nut
and tighten fitting.
Guideline
Screw, top shock
absorber
M10 45 Nm
(33.2 lbf ft)
Loctite
®
243™
–
Mount nut
and tighten fitting.
Guideline
Screw, bottom shock
absorber
M10 45 Nm
(33.2 lbf ft)
Loctite
®
243™
V00280-11
(50 SX Mini)
–
Push splash protector
to the side.
–
Position the shock absorber with screw
, depending on the desired seating
height.
–
Raise the swingarm; position the shock absorber with screw
.
V00279-11
–
Mount nut
and tighten fitting.
Guideline
Screw, top shock
absorber
M10 45 Nm
(33.2 lbf ft)
Loctite
®
243™
–
Mount nut
and tighten fitting.
Guideline
Screw, bottom shock
absorber
M10 45 Nm
(33.2 lbf ft)
Loctite
®
243™
– Install the rear wheel. ( p. 68)
Finishing work
– Remove the motorcycle from the lift stand. ( p. 34)
11.22 Removing the seat
H00066-10
–
Open quick release
and raise the rear of the seat.
– Pull back the seat and remove it.
To Next Page
Loading...
Need help?
General
