16 SERVICE WORK ON THE ENGINE 80
16.1 Checking oil level (50 SX Mini)
Preparatory work
– Stand the motorcycle upright on a horizontal surface.
H00056-10
Main work
– Check the oil level in the oil tank.
For a full fuel tank, the oil tank must be filled up toMIN mark
at a minimum.
» If the oil level does not meet specifications:
– Fill up with oil. ( p. 21)
16.2 Bleeding the oil pump (50 SX Mini)
Condition
The fuel tank has been removed.
H00080-10
–
Pull off oil line
.
300652-10
– Fill the oil line with a syringe.
Engine oil, 2-stroke ( p. 93)
H00080-10
–
Connect oil line
.
300651-10
–
Remove screws
.
– Take off the oil pump.
–
Pull off oil line
from the carburetor.
To Next Page
Need help?
General
