SERVICE WORK ON THE CHASSIS 11
117
11.18 Adjusting the basic position of the clutch lever
Info
When the adjusting screw is turned clockwise, the clutch lever moves closer to the handlebar.
When the adjusting screw is turned counterclockwise, the clutch lever moves away from the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding.
B01943-11
– Adjust the basic position of the clutch lever to your hand size
by turning adjusting screw
1
.
– When adjusting the clutch lever, make sure to leave a mini-
mum clearance to other parts of the vehicle.
Guideline
Minimum clearance 5 mm (0.2 in)
To Next Page
Loading...
Need help?
General
