KTM 690 Enduro R 2018 User Manual

20 TROUBLESHOOTING
226
Faults Possible cause Action
The engine does not turn when
the starter button is pressed
Operating error – Carry out the start procedure.
( p. 57)
The battery is discharged – Recharge the battery. ( p. 169)
– Check the quiescent current.
Fuses 1, 2, 3 are blown – Change the fuses of individual power
consumers. ( p. 176)
Main fuse burned out – Change the main fuse. ( p. 172)
No ground connection present – Check the ground connection.
Engine turns only if the clutch
lever is drawn
The vehicle is in gear – Shift gear to neutral.
The vehicle is in gear and the
side stand is folded out
– Shift gear to neutral.
Engine turns but does not start. Operating error – Carry out the start procedure.
( p. 57)
Fuse 3 blown – Change the fuses of individual power
consumers. ( p. 176)
The plug-in connection of the
fuel hose connection is not
connected
– Connect the plug-in connection of the
fuel line.
Defect in fuel injection system – Read out the fault memory using the
KTM diagnostics tool.

KTM 690 Enduro R 2018 Specifications

General

Brand	KTM
Model	690 Enduro R 2018
Category	Motorcycle
Language	English