KTM 690 Enduro R 2018 User Manual

SERVICE WORK ON THE ENGINE 17
215
M00649-10
Main work
–
Remove filler plug with O-ring
1
from the clutch cover and
add engine oil.
Engine oil 1.70 l
(1.8 qt.)
Engine oil
(SAE 10W/60)
(00062010035)
( p. 258)
Engine oil
Alternative engine oil
Engine oil
(SAE 10W/50)
( p. 259)
–
Refit plug with O-ring
1
and tighten it.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
– Start the engine and check that it is oil-tight.
Finishing work
– Install the engine guard. ( p. 121)

KTM 690 Enduro R 2018 Specifications

General

Engine Type	Single cylinder, 4-stroke
Displacement	690 cc
Bore x Stroke	105 mm x 80 mm
Compression Ratio	12.7:1
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP shock absorber with Pro-Lever linkage
Rear Brake	Brembo single-piston floating caliper, 240 mm disc
Front Tire	90/90-21
Rear Tire	140/80-18
Seat Height	910 mm
Ground Clearance	270 mm
Fuel Tank Capacity	13.5 liters
Dry Weight	146 kg
Fuel System	Electronic fuel injection (EFI)
Frame	Chromoly steel trellis frame
Front Brake	300 mm disc
ABS	Bosch
Front Wheel	21-inch
Rear Wheel	18-inch
Power	67 hp (49.5 kW) @ 7500 rpm
Wheelbase	1504 mm