KTM 790 Duke 2019 User Manual

SERVICE SCHEDULE 11
127
Every two years
Every year
every 30,000 km (18,600 mi)
every 15,000 km (9,300 mi)
after 1,000 km (620 mi)
Check the front brake fluid level. ( p. 155) ○ ● ● ●
Check the rear brake fluid level. ( p. 161) ○ ● ● ●
Change the front brake fluid. ●
Change the rear brake fluid. ●
Check the free travel of the clutch lever. ( p. 236) ○ ● ● ● ●
Check the free travel of the foot brake lever. ( p. 160) ○ ● ● ● ●
Check the shock absorber and fork for leaks. Perform fork service as needed and
depending on how the vehicle is used.
○ ● ● ● ●
Clean the dust boots of the fork legs. ( p. 134) ● ●
Check steering head bearing play. ○ ● ● ● ●
Check the tire condition. ( p. 180) ○ ● ● ● ●
Check tire pressure. ( p. 182) ○ ● ● ● ●
Check the chain, rear sprocket, engine sprocket, and chain guide. ( p. 147) ● ● ● ●
Check the chain tension. ( p. 143) ○ ● ● ● ●
Change the spark plugs. ●
Check the valve clearance. ●
Check the antifreeze and coolant level. ( p. 213) ○ ● ● ● ●

KTM 790 Duke 2019 Specifications

General

Displacement	799 cc
Bore x Stroke	88 mm x 65.7 mm
Compression Ratio	12.7:1
Power	105 hp (77 kW) @ 9, 000 rpm
Torque	87 Nm @ 8, 000 rpm
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Rear Suspension	WP monoshock
Front Tire	120/70 ZR 17
Rear Tire	180/55 ZR 17
Seat Height	825 mm
Dry Weight	169 kg
Engine Type	2-cylinder, 4-stroke, parallel twin
Frame	Chromoly-steel trellis frame, powder coated
Front Suspension	WP upside-down fork, 43 mm
Front Brake	2 x 300 mm disc, 4-piston radial fixed caliper
Rear Brake	240 mm disc with single-piston caliper
Fuel Tank Capacity	14 liters
ABS	Bosch 9.1 MP (incl. Cornering-ABS and Supermoto mode)