KTM 790 Duke 2019 User Manual

16 ELECTRICAL SYSTEM
210
16.14 Diagnostics connector
H02681-10
Diagnostics connector
1
is located under the passenger seat.
(790 Duke CN)
A diagnosis adapter has been connected in the factory for con-
nection with diagnosis interface which applies to all manufac-
turers.
Info
Remove the diagnosis adapter to use the KTM diagno-
sis tool.
Following completion of the diagnostics, plug the diag-
nostics adapter back in.
16.15 Front ACC1 and ACC2
V01216-10
Installation location
–
Power supplies ACC1
1
and ACC2
2
front are located
under the cover of the headlight mask rack.

KTM 790 Duke 2019 Specifications

General

Displacement	799 cc
Bore x Stroke	88 mm x 65.7 mm
Compression Ratio	12.7:1
Power	105 hp (77 kW) @ 9, 000 rpm
Torque	87 Nm @ 8, 000 rpm
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Rear Suspension	WP monoshock
Front Tire	120/70 ZR 17
Rear Tire	180/55 ZR 17
Seat Height	825 mm
Dry Weight	169 kg
Engine Type	2-cylinder, 4-stroke, parallel twin
Frame	Chromoly-steel trellis frame, powder coated
Front Suspension	WP upside-down fork, 43 mm
Front Brake	2 x 300 mm disc, 4-piston radial fixed caliper
Rear Brake	240 mm disc with single-piston caliper
Fuel Tank Capacity	14 liters
ABS	Bosch 9.1 MP (incl. Cornering-ABS and Supermoto mode)