23 TECHNICAL DATA
250
23.1 Engine
Design 2-cylinder 4-stroke in-line engine, water-cooled
Displacement 799 cm³ (48.76 cu in)
Stroke 65.7 mm (2.587 in)
Bore 88 mm (3.46 in)
Compression ratio 12.7:1
Control DOHC, 4 valves per cylinder controlled via cam lever,
chain drive
Valve diameter, intake 36 mm (1.42 in)
Valve diameter, exhaust 29 mm (1.14 in)
Valve play, cold
Intake at: 20 °C (68 °F) 0.10 … 0.15 mm (0.0039 … 0.0059 in)
Exhaust at: 20 °C (68 °F) 0.15 … 0.20 mm (0.0059 … 0.0079 in)
Crankshaft bearing Slide bearing
Conrod bearing Slide bearing
Piston pin bearing Piston pin with ceramic coating
Pistons Forged light alloy
Piston rings 1 compression ring, 1 lower compression ring, 1 oil
ring with spring expander
Engine lubrication Semi-dry sump lubrication system with two rotor
pumps
To Next Page
Loading...
Need help?
General
