COOLING SYSTEM 17
215
The radiator must be filled completely.
» If the coolant level does not match the specified value:
– Check the coolant level and the reason for the loss.
» If you had to add more coolant than the specified amount:
> 0.50 l (> 0.53 qt.)
– Fill/bleed the cooling system. ( p. 219)
–
Mount radiator cap
1
.
17.3 Checking the coolant level in the compensating tank
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
– Do not open the radiator, the radiator hoses or other cooling system components if the engine or the
cooling system are at operating temperature.
– Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses
or other components of the cooling system.
– In the event of scalding, rinse the area affected immediately with lukewarm water.
To Next Page
Loading...
Need help?
General
