KTM 790 Duke 2019 User Manual

16 ELECTRICAL SYSTEM
198
Info
Two fuses for the ABS are located under the passenger seat. These fuses protect the return pump and the
hydraulic unit of the ABS. The third fuse, which protects the ABS control unit, is located in the fuse box.
Preparatory work
– Switch off the ignition by turning the ignition key to the posi-
tion .
– Remove the passenger seat. ( p. 136)
V01209-10
To change the fuse of the ABS hydraulic unit:
–
Remove the protection cap and fuse
1
.
Info
A faulty fuse has a burned-out fuse wire
A
.
– Insert a spare fuse with the correct rating.
Fuse (75011088015) ( p. 260)
Tip
Insert spare fuse
2
in the fuse box so that it is
available if needed.
– Mount the protection cap.

KTM 790 Duke 2019 Specifications

General

Displacement	799 cc
Bore x Stroke	88 mm x 65.7 mm
Compression Ratio	12.7:1
Power	105 hp (77 kW) @ 9, 000 rpm
Torque	87 Nm @ 8, 000 rpm
Transmission	6-speed
Fuel System	Electronic Fuel Injection
Rear Suspension	WP monoshock
Front Tire	120/70 ZR 17
Rear Tire	180/55 ZR 17
Seat Height	825 mm
Dry Weight	169 kg
Engine Type	2-cylinder, 4-stroke, parallel twin
Frame	Chromoly-steel trellis frame, powder coated
Front Suspension	WP upside-down fork, 43 mm
Front Brake	2 x 300 mm disc, 4-piston radial fixed caliper
Rear Brake	240 mm disc with single-piston caliper
Fuel Tank Capacity	14 liters
ABS	Bosch 9.1 MP (incl. Cornering-ABS and Supermoto mode)