3-2
Repair manual KTM 85 SX Art No 3.206.008-E
Removing the engine
Before removing the engine thoroughly clean the entire motorcycle.
Let the motorcycle cool down before commencing to remove the
engine. Danger of burns!
– Jack the motorcycle up on a stable supporting device.
– Remove the bolt
1 on the seat, slightly lift the back of the seat and
pull off towards the rear.
– Close the fuel tap and disconnect the hose.
– Remove the chain joint and take off the chain.
– Undo the bolt
2
and remove.
– Lift of tank together with spoilers.
– Unhook the two springs
3
of the exhaust pipe.
– Remove the bolt of the front exhaust bracket
4
.
1
2
3
3
4