15 ELECTRICAL SYSTEM 142
L02161-10
Main work
–
Turn socket
counterclockwise.
–
Pull the socket with low beam bulb
out of the headlight housing.
–
Disconnect the socket with the low beam bulb from connector
and remove.
– Connect the new socket with the low beam bulb to the connector.
Low beam (H11 / Sockel PGJ19-2) ( p. 188)
L02166-10
– Position the socket with the low beam bulb in the headlight housing.
– Turn the socket clockwise.
– Check that the lighting is functioning properly.
To Next Page
Loading...
Need help?
General
