OPERATING THE TRACTOR30
BTurn Signal Light Switch
To indicate a right turn, turn the switch clockwise.
To indicate a left turn, turn the switch counter-clockwise.
When the left or right turn signal is activated in
combination with the hazard lights, the indicated turning
light will flash and the other will stay on.
A Be sure to return switch to center position after turning.
BBrake Pedal
Make sure to latch the brake pedal with the parking brake
lock pedal. Use both right and left feet for the procedure.
To avoid personal injury:
A An accident may occur if the tractor is
suddenly braked, such as by heavy towed
loads shifting forward or loss of control.
A The braking characteristics are different
between two and four wheel drive. Be aware of
the difference and use carefully.
A When driving on icy, wet or loose surfaces,
make sure the tractor is correctly ballasted to
avoid skidding and loss of steering control.
Operate at reduced speed.
Move the hydraulic control lever rearward.
(1) Hazard light switch
(2) Head light switch
(3) Turn signal light switch
(A) "ON"
(B) "OFF"
(C) "RIGHT TURN"
(D) "LEFT TURN"
3. Checking the Brake Pedal.
(1) Brake pedal
(2) Parking brake lock pedal
(A) "DEPRESS"
(B) "PUSH FORWARD
WHILE DEPRESSING (1)"
4. Raise the Implement.
(see "HYDRAULIC UNIT" section.)
(1) Hydraulic control lever "RAISED"
(N) "NEUTRAL POSITION"
"LOWERED"
5. Selecting the Travel Speed.
To Next Page
Loading...
Need help?
General
