OPERATING THE TRACTOR32
C Front wheel drive is effective for the following
jobs:
1. When greater pulling force is needed, such as working
in a wet field, when pulling a trailer, or when working
with a front-end loader.
2. When working in sandy soil.
3. When working on a hard soil where a rotary tiller might
push the tractor forward.
4. Additional braking at reduced speeds.
BHand Throttle Lever
Pulling the throttle lever back increases engine speed,
and pushing it forward decreases engine speed.
BParking Brake Pedal
To release the parking brake, depress the brake pedal
again.
BSpeed Control Pedal
To avoid personal injury:
A Do not operate if tractor moves on level ground
with foot off Speed Control Pedal.
Forward Pedal
Depress the forward pedal with the toe of your right foot to
move forward.
Reverse Pedal
Depress the reverse pedal with the heel of your right foot
to move backward.
A To prevent serious damage to the HST, do not adjust
the stopper bolts.
A When you stand up from the seat with the speed
control pedal stepped on, the engine will stop
regardless of whether the machine is moving or not.
This is because the tractor is equipped with Operator
Presence Control system (OPC).
6. Accelerate the Engine.
(1) Hand Throttle lever "INCREASE"
"DECREASE"
7. Unlock the Parking Brake.
(1) Brake pedal
8. Depress the Speed Control Pedal.
(1) Speed control pedal
(2) Stopper bolts
(A) "FORWARD"
(B) "REVERSE"
To Next Page
Loading...
Need help?
General
