OPERATING THE ENGINE24
To lower implement, move the hydraulic control lever
forward.
Check that implement is down at lowest position.
4. Lock the loader control lever in
"NEUTRAL" position.
(1) Loader control lever
(2) Lock lever
(A) "LOCK"
5. Move the hydraulic control lever
forward. (With the implement in place.)
(1) Hydraulic control lever (A) "DOWN"
6. Set the throttle lever to about 1/2 way.
(1) Hand throttle lever "INCREASE"
"DECREASE"
7. Insert the key into the key switch and
turn it "ON".
"OFF"
"ON"
"PREHEAT"
"START"
To Next Page
Loading...
Need help?
General
