Kubota BX2670 User Manual

35HYDRAULIC UNIT
BHydraulic Control Unit Use Reference Chart
In order to handle the hydraulics properly, the operator must be familiar with the following. Though this information may not
be applicable to all types of implements and soil conditions, it is useful for general conditions.
Implement
Soil condition
(1) Hydraulic control lever
Gauge wheel
(1) Check chains
Remarks
Moldboard plow
Light soil
Medium soil
Heavy soil
Hydraulic control
YES/NO Loose
Adjust the check
chains so that
the implement
can move 5 to 6
cm (2.0 to 2.4
in.) laterally.
Check chains
should be tight
enough to
prevent
excessive
implement
movement when
implement is in
raised position.
Disc plow ---
Harrower (spike,
springtooth, disc
type)
---
Sub-soiler......
Weeder, ridger.....
---
YES
Tighten
Earthmove, digger
scraper, manure
fork rear carrier....
YES/NO
For implements
with gauge
wheels, lower
the position
control lever all
way.
Mower (mid-and
rear-mount type)
Hayrake, tedder...

Kubota BX2670 Specifications

General

Transmission	Hydrostatic
Hydraulic System Type	Open center
3-Point Hitch	Category I
Tire Size (Front)	18x8.5-10
Tire Size (Rear)	26x12-12
Power Take-off (PTO)	Independent
Rear PTO RPM	540
Mid PTO RPM	2500
Steering	Power Steering
Brakes	Wet disc
Engine Type	Diesel
PTO Horsepower	19.4 hp (14.5 kW)
Fuel Tank Capacity	6.6 gal (25 L)
Hydraulic Pump Capacity	6.3 GPM (23.8 L/min)
Lift Capacity at 24"	680 lbs (308 kg)
Wheelbase	55.1 in (1400 mm)
Horsepower	25.5 hp (19 kW)