Name: Kubota BX2670
Brand: Kubota
Rating: 4 (1 reviews)

To Next Page

To Previous Page

61PERIODIC SERVICE

BChanging Engine Oil

To avoid personal injury:

A Be sure to stop the engine and remove the key

before changing the oil.

A Allow engine to cool down sufficiently, oil can

be hot and can burn.

1. To drain the used oil, remove the drain plug at the

bottom of the engine and drain the oil completely into

the oil pan.

All the used oil can be drained out easily when the

engine is still warm.

2. After draining reinstall the drain plug.

3. Fill with the new oil up to the upper notch on the

dipstick.

(See "LUBRICANTS" in "MAINTENANCE" section.)

4. Properly dispose of used oil.

Oil

capacity

with filter

BX1870D 2.9 L (3.06 U.S.qts.)

BX2370D 3.1 L (3.3 U.S.qts.)

BX2670D 3.5 L (3.7 U.S.qts.)

(1) Oil inlet

(2) Dipstick

(A) Oil level is acceptable within this range

(1) Drain plug

Other manuals for Kubota BX2670

Questions and Answers:

Need help?

Do you have a question about the Kubota BX2670 and is the answer not in the manual?

General