REGULAR CHECKS AND MAINTENANCE WORK82
EVERY 1000 SERVICE HOURS OR ONCE A
YEAR
BReplacing Air Filter Element
Open the engine hood and remove the dust-cover.
Remove and replace the outer element and inner element
with new elements.
When reassembling, install the dust-cover so that its TOP
mark (arrow) faces up-wards.
A Shorten the replacement period if the machine is used
in dusty or sandy areas.
EVERY 1500 SERVICE HOURS
Do all 50, 100, 250 and 500 hour servicing at the same
time.
BChecking Injector Tip
Consult your local KUBOTA Dealer for this service.
BReplacing Oil Separator Element and O
Ring
To avoid personal injury:
A Be sure to stop the engine before replacing the
oil separator element.
1. Remove the cover and take out the element and O
ring. Wipe off oil and the carbon in the case with a
clean rag.
2. Fit a new oil separator element and O ring.
3. Tighten the cover until a cover comes in contact with
body.
(1) Inner element
(2) Outer element
(3) Dust-cover
(4) Clamps
(1) Oil separator
(1) Body
(2) Oil separator element
(3) O ring
(4) Cover
To Next Page
Loading...
Need help?
General
