120 TROUBLESHOOTING
ERROR No. 92
Hi-Lo SOLENOID NG
Motor for Hi-Lo shift is in trouble Contact your local KUBOTA Dealer.
Using the H-DS lever, the Lo speed alone can be
selected (Hi speed not selectable).
In the HST mode, only the STALL GUARD and
MANUAL modes can be selected.
ERROR No. 93
Starter RELAY NG
Relay for engine starter motor is
in trouble
Contact your local KUBOTA Dealer.
The engine cannot start.
ERROR No. 94
OPC NG
Relay for engine shut off is in
trouble
Contact your local KUBOTA Dealer.
The Operator Presence Control (OPC) system gets
activated, and the engine stops itself.
ERROR No. 95
PTO SOLENOID NG
Solenoid (PTO) is in trouble Contact your local KUBOTA Dealer.
The PTO shaft cannot rotate.
Display on IntelliPanel(TM) Trouble Item (Affected Model) Operator's action