CAB OPERATION64
CIGARETTE LIGHTER
Push the lighter knob down to activate, with the key switch
in the "ON" or "ACC" positions.
Lighter will move up when ready to use.
INSTALLING THE IMPLEMENT CONTROL
BOX
1. Make an opening in each of the rubber caps. Introduce
the implement control cable and hydraulic hose
through these openings into the CAB.
2. Make the holes in each of the pillar covers located on
the marked portion. Install the implement control box
in place.
BElectrical Outlet
A electrical outlet is supplied for use with implement.
(1) Cigarette lighter
(1) Rubber cap
(1) 4 - M8 nuts
(2) 2 - M6 nuts
(1) Accessory electrical outlet (15A)
To Next Page
Loading...
Need help?
General
