OPERATION OF THE ENGINE12
BDisplay Selector Switch
Press the display selector switch while the engine is
running. The LCD meter display will change from one
indication mode to the other.
Change the three-mode display according to your jobs.
A With the starter key at the "STOP" position, press the
electronic meter's display selector switch, and the LCD
display shows the hour meter for 10 seconds.
C Setting the clock
[Selecting the clock setting mode]
1. Turn the starter key to the position "RUN".
2. Press the user setting switch (switch 2 (1)).
3. Select the clock setting mode by pressing the display
selector switch (switch 3 (2)) and the clock setting
request lamp " " on the instrument panel lights up.
A Press switch 3 (2) for a long time and the year, month,
day, hour and minute will be selected in this order.
(1) Display selector switch
(2) LCD display
(1) Starter switch (A) "STOP"
(B) "RUN"
(C) "START"
(1) User setting switch (switch 2)
(2) Display selector switch (switch 3)
(3) Clock setting request lamp
To Next Page
Loading...
Need help?
General
