OPERATION OF THE ENGINE16
C Coolant Temperature Gauge
To avoid personal injury:
A Do not open the radiator cap during or just after
operation. Hot coolant may gush out and scald
you. Wait for the coolant to cool down before
opening the cap.
With the starter key at the "RUN" position, the cooling
water temperature is indicated.
C Hour-meter
Indicates the total operating hours of the machine.
How the indicator works
A The meter advances one hour after an hour of
operation regardless of the engine rpm.
C Engine tachometer
Indicates the current rpm of the engine.
A The LCD display may be illegible when viewed from a
certain angle. This is not a display failure.
BLCD Display for Warning
C Engine oil pressure warning lamp
The engine oil pressure warning lamp lights up due to
failure of the lubricating system with the engine running.
When the starter key is turned to "RUN" position with the
engine off, this engine oil pressure lamp lights up, warning
lamp blinks and when the engine starts, the lamps go out.
If the lamp stays on with the engine running, stop the
engine and check the engine oil level.
C Battery charge lamp
This battery charge lamp lights up if the charging system
fails with the engine running.
When the starter key is turned to "RUN" position with the
engine off, the battery charge lamp lights up, warning
lamp blinks and when the engine starts, the lamps go out.
If the lamp stays on with the engine running, stop the
engine and check the V-belt.
(1) Coolant temperature gauge (A) "HOT"
(B) "COOL"
(1) Engine oil pressure lamp
(2) Warning lamp (red)
(3) Error code
(1) Battery charge lamp
(2) Warning lamp (red)
(3) Error code
To Next Page
Loading...
Need help?
General
