Kubota u25 User Manual

34 MAINTENANCE
MAINTENANCE
MAINTENANCE INTERVALS
No. Check points Intervals
Hour meter indicator
Consequently
Ref.
page
50 100 150 200 250 300 350 400 450
1 Coolant
check Daily check 39
change every 2 years 52
2 Fuel check Daily check 37
3 Engine oil
check Daily check 38
change every 500 hrs 46
4 Hydraulic oil
check Daily check 38
change every 1000 hrs 50 *1
5 Lubrication points - Daily check 39
6 Radiator and oil cooler check Daily check 40
7 Engine and electrical wiring check Daily check 40
8 Fuel tank, Water separator drain every 50 hrs 41,41
9 Battery condition check every 50 hrs 42
10 Greasing swing bearing teeth - every 50 hrs 43
11 Fan belt tension
check Daily check 40
adjust every 200 hrs 44
12 Radiator hoses and clamps
check every 200 hrs 44
replace every 2 years 52
13 Air filter element
Outer element
clean every 200 hrs 45 *2
@
replace every 1000 hrs 51 *2
Inner element replace every 1000 hrs 51 *2
14 Greasing swing ball bearings - every 200 hrs 45
15 Fuel filter cartridge replace every 500 hrs 48 @
16 Engine oil filter replace every 500 hrs 47
17 Drive unit oil change every 500 hrs 48
18 Hydraulic return filter element replace every 500 hrs 49
19 Hydraulic suction filter element replace every 1000 hrs 50
20 Filter in the pilot hydraulic system replace every 1000 hrs 49
21
Fuel injection nozzle injection
pressure
check every 1500 hrs 51 *4 @
22 Front idler and track roller oil change every 2000 hrs 51
23 Alternator and starter motor check every 2000 hrs 51
24 Injection pump check every 3000 hrs 51 *4 @
25 Radiator system rinse every 2 years 52
26 Fuel line and Intake air line
check every 200 hrs 46
@
replace every 2 years 53 *3
27 Greasing pilot valve linkage - every 250 hrs 46
28 Pilot circuit filter clean every 1000 hrs 49
D 500 thru 1000 continued to the following table.

Kubota u25 Specifications

General

Brand	Kubota
Model	u25
Category	Excavators
Language	English