Kubota u25 User Manual

58 TROUBLESHOOTING
KUBOTA I.C.S. NAVIGATION LIST OF ERROR CODE
If an error occurs with the machine, one of the following error codes appears in the LCD display.
In case of a trouble, immediately contact your local dealer for inspection and repair.
LCD display LED Problem / Error Solution #1 Solution #2
1
CAN system error
The Controller Area
Network (CAN) has
developed a fault.
Measured values may
be incorrect and
switches may not
function.
The machine can be
started and driven.
Do not perform any
work with the
machine.
Inform your
KUBOTA dealer
immediately.
2
Feed fuel
This message
appears when the fuel
level is low and
prompts the operator
to refuel.
---
Refuel the
excavator.
3
Periodic check soon
(notice)
This message
appears 10 hours
before the periodic
check interval.
This message means
that the regular
service is due shortly.
Operate the
machine as usual.
Ask your
KUBOTA dealer
about the
relevant parts.
Run the
maintenance
procedure.
4
Periodic check passed
(warning)
This message means
that the regular
service is due.
The machine can be
operated but service
must be carried out
urgently.
Ask your
KUBOTA dealer
about the
relevant parts.
Run the
maintenance
procedure.
5
Warning temperature
rising
The temperature of
the coolant is higher
than normal.
Operate the
machine only with
reduced loads until
the temperature is
normal again.
---
6 --- --- --- --- ---
7 --- --- --- --- ---
8 --- --- --- --- ---

Kubota u25 Specifications

General

Brand	Kubota
Model	u25
Category	Excavators
Language	English