1-S18
ZD18(F) · ZD21(F) · ZD28(F), WSM
ENGINE
[D1105-E-ZD]
NOTE
• In removing and applying the bolts and nuts marked with “ * ”, a pneumatic wrench or similar pneumatic
tool, if employed, must be used with enough care not to get them sized.
• For * marked screws, bolts and nuts on the table, apply engine oil to their threads and seats before
tightening.
• The letter “M” in Size × Pitch means that the screw, bolt or nut dimension stands for metric. The size is
the nominal outside diameter in mm of the threads. The pitch is the nominal distance in mm between two
threads.
W1026768
Item Size × Pitch N·m kgf·m ft-lbs
Air cleaner stay nut
* Bearing case cover screw
Connecting rod screw
* Cylinder head cover cap nut
* Cylinder head screw
* Fan drive pulley screw
* Flywheel
Glow plug
* Idle gear shaft mounting screw
Injection pipe retaining nut
* Main bearing case screw 1
* Main bearing case screw 2
Nozzle holder
Nozzle holder assembly
* Oil pressure switch
Overflow pipe assembly retaining nut
* Rocker arm bracket nut
M10 × 1.25
M6 × 1.0
M8 × 1.0
M7 × 1.0
M10 × 1.25
M14 × 1.5
M10 × 1.25
M8 × 1.0
M6 × 1.0
M12 × 1.5
M8 × 1.25
M9 × 1.25
M20 × 1.5
PT 1/8
M12 × 1.5
M7 × 1.0
48.1 to 55.9
9.8 to 11.3
41.2 to 46.1
6.9 to 8.8
63.7 to 68.6
235.4 to 245.2
53.9 to 58.8
7.8 to 14.7
9.8 to 11.3
24.5 to 34.3
29.4 to 34.3
49.0 to 53.9
34.3 to 39.2
49.0 to 68.6
14.7 to 19.6
19.6 to 24.5
21.6 to 26.5
4.9 to 5.7
1.00 to 1.15
4.2 to 4.7
0.7 to 0.9
6.5 to 7.0
24.0 to 25.0
5.5 to 6.0
0.8 to 1.5
1.00 to 1.15
2.5 to 3.5
3.0 to 3.5
5.0 to 5.5
3.5 to 4.0
5.0 to 7.0
1.5 to 2.0
2.0 to 2.5
2.2 to 2.7
35.4 to 41.2
7.2 to 8.3
30.3 to 33.9
5.1 to 6.5
47.0 to 50.6
173.6 to 180.8
39.8 to 43.4
5.8 to 10.8
7.2 to 8.3
18.1 to 25.3
21.7 to 25.3
36.2 to 39.8
25.3 to 28.9
36.2 to 50.6
10.8 to 14.5
14.5 to 18.1
15.9 to 19.5
To Next Page
Loading...
