－－8－－8
(6) SEAT LOCK/MET-IN BOX(6) SEAT LOCK/MET-IN BOX
Unlock the seat and put the helmet in the MET-IN box.
Unlocking Method>>
Stop the engine and turn the ignition switch to the "OFF"
position. Insert the ignition switch key into the seat lock
and turn it right.
To lock the seat, push on it until it lock automatically.
Make sure the seat is secure before riding.
<<
Unlock the seat and put the helmet in the MET-IN box.
Unlocking
Method>>
Stop
the engine and turn the ignition switch to the "OFF"
position.
Insert the ignition switch key into the seat lock
and
turn it right.
To
lock the seat, push on it until it lock automatically.
Make
sure the seat is secure before riding.
<<
Never put the key inside the seat cushion to lock the seat.Never put the key inside the seat cushion to lock the seat.
(7) HELMET BUCKLE(7) HELMET BUCKLE
1.Open the seat with the ignition switch key and lift up the
seat.
2.Put the helmet retaining ring into the helmet buckle.
3.Put down the seat and it will lock automatically.
Take out the helmet in the reserve order of the above steps.
1.Open the seat with the ignition switch key and lift up the
seat.
2.Put
the helmet retaining ring into the helmet buckle.
3.Put
down the seat and it will lock automatically.
Take
out the helmet in the reserve order of the above steps.
When riding, wear the helmet and do not retain it on the
motorcycle to avoid damage of coated parts.
When riding, wear the helmet and do not retain it on the
motorcycle
to avoid damage of coated parts.
CAUTION:
CAUTION:
To Next Page
Loading...
Need help?
General
