KYMCO Agility 50 User Manual

(3) BRAKE INSPECTION(3) BRAKE INSPECTION
Ride the motorcycle at low speed on a dry road and
respectively apply the front brake lever and rear brake
pedal to check the brake performance.
The brake lever should have proper free play.
Free play" means the distance from the position of
loose brake to the position of fully applied brake.
Measure the free play at the brake lever end and check if
it is within the specified value of (1 cm rear brake).
"
-2
Ride the motorcycle at low speed on a dry road and
respectively
apply the front brake lever and rear brake
pedal
to check the brake performance.
The
brake lever should have proper free play.
Free
play" means the distance from the position of
loose
brake to the position of fully applied brake.
Measure
the free play at the brake lever end and check if
it
is within the specified value of (1 cm rear brake).
"
-2
(4) TIRE INSPECTION(4) TIRE INSPECTION
1. TIRE PRESSURE CHECK1. TIRE PRESSURE CHECK
Check if the tire pressure is normal when the tire is in
contact with level ground.
If there is any abnormal condition, check the tire pressure
with a tire pressure gauge.
Measure the tire pressure under room temperature.
The tire pressure must not overpass 2.50kg/cm
2
Check if the tire pressure is normal when the tire is in
contact
with level ground.
If
there is any abnormal condition, check the tire pressure
with
a tire pressure gauge.
Measure
the tire pressure under room temperature.
The
tire pressure must not overpass 2.50kg/cm
2
－－11－－11
1-2cm

KYMCO Agility 50 Specifications

General

Displacement	49.5 cc
Cooling System	Air-cooled
Fuel System	Carburetor
Ignition	CDI
Transmission	CVT automatic
Front Suspension	Telescopic fork
Rear Suspension	Single Shock
Front Brake	Disc
Rear Brake	Drum
Front Tire	120/70-12
Rear Tire	130/70-12
Bore x Stroke	39.0 mm x 41.4 mm
Engine Type	4-stroke, SOHC

Summary

Precautions for Safe Riding

Rider Attire and Footwear

Rider attire guidelines including helmet, clothing arrangement, and appropriate footwear for safe riding.

Riding Method and Posture

Operation Instructions

Ignition Switch and Handlebar Lock

Instructions for operating the ignition switch, locking the steering, and methods for locking/unlocking.

Pre-Ride Inspection

Advance Inspection and Oil Level

Importance of pre-ride checks and procedure for inspecting and refilling engine oil level.

Brake Inspection

Procedure for checking front and rear brake performance and ensuring proper free play in brake levers.

Tire Inspection

Fuel Level Inspection and Refilling

Engine Starting Methods

Turn Ignition Switch ON

Steps to turn the ignition switch to the "ON" position and related precautions.

Use Electric Starter Button

Procedure for using the electric starter button, including throttle use and battery protection.

Normal Riding Method

Precautions for Riding

General Riding Tips

Proper Braking Technique

Avoid Sudden Stops and Sharp Turns

Riding in Rainy Days

How to Stop Riding

Easy Maintenance

Engine Oil Change

Step-by-step guide for changing engine oil, including oil type, capacity, and change intervals.

Important Notices

Engine Fails to Start or Stops

Troubleshooting steps for engine starting issues or stopping during riding, checking fuel and starting methods.

In Case of Breakdown

Periodic Inspection & Maintenance Schedule

Specifications