KYMCO Agility 50 User Manual

－－19－－19
(3) USE THE ELECTRIC STARTER BUTTON(3) USE THE ELECTRIC STARTER BUTTON
Push the electric starter button without rotating the
grip.
If the engine fails to start after the electric starter
pressed for 3-4 seconds,
throttle grip for 1/8-1/4 turn to facilitate
When the motorcycle is not used for a long time or
tank is empty, if the engine is still hard to
fuel tank is refilled with gasoline, push
grip
to start the engine.
In order to avoid battery overcharge, do not push the
starter button more than 5 seconds.
If the engine does not start after the electric starter
is pushed for 5 seconds, wait for more than 5
then push the button again or start the
lever.
throttle
button is rotate the
starting.
the fuel
start after the
down the choke knob, slightly turn the throttle
and push the electric starter button for several times
button
seconds and
engine by the kick
Push the electric starter button without rotating the
throttle
grip.
If
the engine fails to start after the electric starter
button
is pressed for 3-4 seconds, rotate the
throttle
grip for 1/8-1/4 turn to facilitate starting.
When
the motorcycle is not used for a long time or
the
fuel tank is empty, if the engine is still hard to
start
after the fuel tank is refilled with gasoline, push
down
the choke knob, slightly turn the throttle grip
and
push the electric starter button for several times
to
start the engine.
In
order to avoid battery overcharge, do not push the
starter
button more than 5 seconds.
If
the engine does not start after the electric starter
button
is pushed for 5 seconds, wait for more than 5
seconds
and then push the button again or start the
engine
by the kick lever.
Don't push the electric starter button while the engine is
running; otherwise the engine will be damaged.
When starting the engine,the rear brake lever must be
applied to connect power and the stoplight will come on
when power is connected.
Don't push the electric starter button while the engine is
running;
otherwise the engine will be damaged.
When
starting the engine,the rear brake lever must be
applied
to connect power and the stoplight will come on
when
power is connected.
CAUTION:

KYMCO Agility 50 Specifications

General

Displacement	49.5 cc
Cooling System	Air-cooled
Fuel System	Carburetor
Ignition	CDI
Transmission	CVT automatic
Front Suspension	Telescopic fork
Rear Suspension	Single Shock
Front Brake	Disc
Rear Brake	Drum
Front Tire	120/70-12
Rear Tire	130/70-12
Bore x Stroke	39.0 mm x 41.4 mm
Engine Type	4-stroke, SOHC