KYMCO Agility 50 User Manual

－－20－－20
(4) START WITH THE KICK LEVER(4) START WITH THE KICK LEVER
1.Place the motorcycle on its main stand on level ground.
2.Depress the kick lever with force.
When the engine is cold and does not start after the kick lever is depressed for
3-4 times, rotate the throttle grip for 1/8-1/4 turn to facilitate starting.
Warm up the engine for a little while (about 2-3 minutes) after cold start.
After the engine is started, do not accelerate suddenly and
keep riding at low speed to prolong the engine service life.
1.Place the motorcycle on its main stand on level ground.
2.Depress
the kick lever with force.
When
the engine is cold and does not start after the kick lever is depressed for
3-4
times, rotate the throttle grip for 1/8-1/4 turn to facilitate starting.
Warm
up the engine for a little while (about 2-3 minutes) after cold start.
After
the engine is started, do not accelerate suddenly and
keep
riding at low speed to prolong the engine service life.
After the engine is started, the kick lever must be returned
to its original position.
The exhaust contains poisonous carbon monoxide which
is harmful to human body. Never run the engine in a
closed area.
Turn off all light switches before starting the motorcycle.
After the engine is started, the kick lever must be returned
to
its original position.
The
exhaust contains poisonous carbon monoxide which
is
harmful to human body. Never run the engine in a
closed
area.
Turn
off all light switches before starting the motorcycle.
CAUTION:
1/8
1/4

KYMCO Agility 50 Specifications

General

Displacement	49.5 cc
Cooling System	Air-cooled
Fuel System	Carburetor
Ignition	CDI
Transmission	CVT automatic
Front Suspension	Telescopic fork
Rear Suspension	Single Shock
Front Brake	Disc
Rear Brake	Drum
Front Tire	120/70-12
Rear Tire	130/70-12
Bore x Stroke	39.0 mm x 41.4 mm
Engine Type	4-stroke, SOHC