KYMCO Mongoose/KXR 250 User Manual

13. BRAKE SYSTEM
13-3
Mongoose/KXR 250
FRONT HYDRAULIC BRAKE
BRAKE PADS REMOVAL
Remove the front wheel. (
Ö
14-3)
Remove the two brake pad pins from the
brake caliper.
Remove the two bolts attaching the brake
caliper and then remove brake caliper.
Compress the brake caliper holder and
remove brake pads.
A wear indicator is provided on each brake.
The indicators allows checking of brake
pads wear. Check the position of the
indicator.
BRAKE DISK
Measure the brake disk thickness.
Service Limit: 3.0mm
Measure the brake disk run out.
Service Limit: 0.3mm
INSTALLATION
Reverse the “BRAKE PADS REMOVAL”
procedures.
Brake Pad Pins
Bolts
Brake Pads
Brake Caliper Holde
r

KYMCO Mongoose/KXR 250 Specifications

General

Brand	KYMCO
Model	Mongoose/KXR 250
Category	Offroad Vehicle
Language	English