KYMCO Mongoose/KXR 250 User Manual

13. BRAKE SYSTEM
13-15
Mongoose/KXR 250
ASSEMBLY
Before assembly, apply brake fluid to all
removed parts.
Reverse the “MASTER CYLINDER ON
THE REAR BRAKE PEDAL
DISASSEMBLY” procedures.
Connect the brake fluid tube to the brake
caliper and tighten the fluid tube bolt.
Torque: 1.8～2.5kgf-m
Fill the brake reservoir with recommended
brake fluid to the upper level.
Bleed air from the hydraulic brake system.
(
Ö
13-12)
During assembly, the master cylinder,
piston and spring must be installed as a
unit without exchange.
＊
Washers

KYMCO Mongoose/KXR 250 Specifications

General

Brand	KYMCO
Model	Mongoose/KXR 250
Category	Offroad Vehicle
Language	English