KYMCO Stryker 125 User Manual

- 18 -
(13) FRONT/REAR SHOCK ABSORBER
INSPECTION
y Check the condition of the front/rear shock
absorbers by pressing down on the handlebar and
seat several times.
(14) BRAKE PERFORMANCE INSPECTION
y Fully apply the front and rear brake levers and
move the motorcycle forward to see if the
braking effect is good.
(15) REARVIEW MIRROR ANGLE CHECK
y Sit on the motorcycle upright and make a
viewing test of the rearview mirror angle.
(16) LICENSE PLATE CHECK
y Check the license plate for dirt and damage, then
tighten it.
(17) REFLECTOR CHECK
y Check the reflector for dirt and damage.
(18) PREVIOUS ABNORMAL PARTS
INSPECTION
y Make sure that the previous abnormal parts are
repaired.
(19) LUBRICATION POINT CHECK
y Visually check if all motorcycle lubrication
points are lubricated properly.

KYMCO Stryker 125 Specifications

General

Fuel System	Carburetor
Front Brake	Disc
Rear Brake	Drum
Front Suspension	Telescopic Fork
Fuel Capacity	5.5 liters
Bore x Stroke	52.4 x 57.8 mm
Starting System	Electric and kick start

Summary

Precautions for Safe Riding

Rider Clothing and Gear

Essential clothing items and their proper arrangement for safe riding.

Riding Techniques

Operation Instructions

Ignition and Steering Lock

How to operate the ignition switch and lock the steering handlebar.

Engine Starting Procedures

Procedure and precautions for using the starter button to start the engine.

Understanding Instruments

Pre-Ride Inspection

Importance of Pre-Ride Checks

Importance and requirement of performing pre-ride inspections for safety.

Engine Oil Level Check

Procedure to check and refill the engine oil level correctly.

Brake System Inspection

Method for inspecting brake performance and lever free play.

Tire Condition and Pressure

Steps for checking tire pressure, damage, and wear.

Fuel Level Check and Refill

How to check fuel level and refill the tank with the correct gasoline.

Brake Lever Free Play Adjustment

Brake Shoe Wear Inspection

Clutch Lever Free Play Check

Drive Chain Inspection and Adjustment

Brake System Performance

Verifying the effectiveness of the braking system.

Engine Starting Methods

Ignition Switch Activation

Steps to turn the ignition switch to the ON position before starting.

Neutral Gear Position

The importance of starting the engine in neutral position.

Using the Starter Button

Detailed procedure for starting the engine using the starter button.

Kick Lever Starting

Normal Riding Method

Engine Start for Riding

Proper Rider Posture

Initiating Movement

Precautions for Riding

Safe Riding Practices

Throttle Control for Speed

Effective Braking Technique

Technique for applying both brakes simultaneously for effective stopping.

Avoiding Sudden Maneuvers

Warnings against sudden stops and sharp turns to prevent accidents.

Riding in Rainy Conditions

Specific precautions for riding safely in rainy weather conditions.

Easy Maintenance

Air Cleaner Maintenance

Battery Care and Maintenance

Fuse Replacement Guide

Engine Oil Replacement

Step-by-step instructions for changing the engine oil.

Spark Plug Servicing

Brake Fluid Management

Checking and refilling the brake fluid level.

Important Notices

Engine Starting and Stopping Issues

Common checks to perform when the engine has starting or stopping issues.

Breakdown Assistance