CONTROLS & FEATURES
23
Suspension
Each shock absorber on your scooter has 5
spring preload adjustment positions for different
load or riding conditions.
Use a fitting wrench to turn the adjuster's boss .
Position 1 is for light loads and smooth road
conditions.
Position 3 to 5 increase spring preload for a more
stiff rear suspension and can be used under
heavy loading.
▆ NOTE:Always adjust the shock absorber pre-
load position in sequence (1-2-3-4-5 or 5-4-3-2-
1).
Attempting to adjust directly from 1 to 5 or 5 to 1
may damage the shock absorber.
Standard spring preload position: 3
1
WARNING
Be certain to adjust both shock absorbers
to the same spring preload position.
Improper setting of shock absorber will
cause unstable handling and might lead
to an accident.
1
1
To Next Page
Loading...
Need help?
General
