Kyocera ECOSYS FS-3540MFP Set Up And Operation Guide

26
Settings page 3
Options
 Sender E-mail: The ‘From’ E-mail address used to send reports.
 SMTP Server: SMTP server address for sending reports by email. Server address could be
specified as an IP Address or host-name.
 SMTP Port: SMTP server port (default: 25).
 Login: Account used to authenticate to SMTP server.
 Password: Password used to authenticate to SMTP server.
 Subject: Subject line of email message. This can be changed before sending the email.
 Body: Text that will appear in the body of the email.
 Grade A ~ Grade D: The percentage thresholds for each grade letter. Default limits are:
Grade
Value entered at the panel
Meaning
A
90
90 % and higher
B
80
80 % to 89%
C
70
70 % to 79%
D
60
60% to 69%
F
-
Lower than 60 %
 Scan User and Scan Password: MFP user account used to execute scan job. This must be a local
user account with permission to scan. This account is used only when authentication is enabled
on the MFP. The default username and password are “Admin”, “Admin” (note capital letter ‘A’).
 Page Shift: Adjust this value to avoid clipping a portion of the student’s name when generating a
report. The default is set to 0. Both positive and negative values can be entered to shift the
clipping area down or up.
 Test SMTP: Press the Test SMTP button to validate SMTP settings by sending a test email
message to the sender.

Kyocera ECOSYS FS-3540MFP Specifications

General

Brand	Kyocera
Model	ECOSYS FS-3540MFP
Category	Software
Language	English