Kyocera ECOSYS FS-3540MFP Set Up And Operation Guide

27
8. Troubleshooting
8.1 Unable to Print tests
Symptom:
In the Print Test application, when ‘Print’ button is pressed, no output is produced. After a delay, the
application exits.
Check:
Ensure the network cable is connected and link lights are active.
Check:
Job Status screen to ensure no other jobs are queued.
8.2 Unable to Scan tests for grading
Symptom:
In the Grade Test application, when ‘Scan’ button is pressed, MFP displays “Error occurred while
scanning” message.
Check:
Ensure the network cable is connected and link lights are active.
Check:
Ensure test sheets are placed properly on the document feeder.
Check:
If authentication is enabled on the MFP, ensure the values for Scan User and Scan Password (in
Application Settings) are correct.
© 2011 Kyocera Mita America, Inc.
Rev. 1.1

Kyocera ECOSYS FS-3540MFP Specifications

General

Brand	Kyocera
Model	ECOSYS FS-3540MFP
Category	Software
Language	English