Advanced
3
Select the Enables Event Notification check box.
4
Select an event for a Status Monitor alert.
Cover open
Paper jam
Add paper
Sleep
Add toner
Toner low
Not connected
Printing completed
Others
5
You can also add sound or speech to your chosen alert.
To add a sound file:
Clear the Use Text to speech check box.
The Sound file text box becomes available. Type the location of a sound file
(.WAV), or Browse to find a sound file located on your computer.
To add speech:
Select Use Text to speech.
Type your preferred text in the Text to speech text box. The Microsoft Text
to Speech utility reads your typed text and plays it back in a spoken voice.
After you select a sound file, or type text for Text to speech, you can click the
arrow below the text box to play the sound or speech.
6
Click Apply to save your settings, click OK to save your settings and close the
dialog box, or click Cancel to close the dialog box without saving any settings.
EMF Spooling
EMF (Enhanced MetaFile) is a spool file format used in printing by the Microsoft
Windows operating system. When a print job is sent from an application, it is
transferred to the spool file. The application writes to and the printer driver reads
from the spool file simultaneously. For multiple or large documents, this quickly
returns application control to the user while the printer is still printing the
document.
Note: EMF spooling is unavailable when Allow data passthrough is
selected in the KPDL Settings dialog box.
Selecting EMF Spooling
To print with EMF spooling:
1
From the Advanced tab, select the EMF Spooling check box.
2
Click OK and continue the printing process as usual.
Printer Driver 10-11
To Next Page
Loading...
Need help?
General