Operation on the Machine > Scanning Document stored in a Custom Box
252
Scanning Document stored in a Custom Box
Follow the steps as below for scanning a document stored in a custom box using the TWAIN driver. When
transmitting using wireless LAN, select the interface dedicated to the send function in advance.
NOTE
• When transmitting using wireless LAN, select the interface dedicated to the send function in advance.
➡ Primary Network (Client) (page 495)
• Before sending a document, confirm that TWAIN driver is installed on a computer and the settings are
configured.
➡ Setting TWAIN Driver (page 106)
• To load a document saved in the Custom Box, select the model name with (Box) from “Model” on the TWAIN
driver configuration screen.
1
Display the screen.
1 Activate the TWAIN compatible application software.
2 Select the machine using the application and display the dialog box.
NOTE
For selecting the machine, see the Operation Guide or Help for each application software.
2
Display lists of documents.
1 Select a custom box stored a document.
If a password has been set for the box, the password entry screen appears. Enter the password and click
the [OK] button. When you select a box, the document files in the Custom Box appear in "Document List".
2 Set how to display the document data. Click the [Setting] button to select each item.
NOTE
For the settings, refer to Help in the dialog box.
3 Click the [OK] button.
3
Scan the originals.
1 Select the document data to be scanned from "Document List".
Enter the document data name in the "Search (Name)" to find the data having the same document data
name or the document data name with the same beginning.
Click the [Detail] button to display the selected document data. When the document data includes
multiple pages, select the checkbox beside the pages you want to scan. The selected pages will be
scanned.