Please Read First > Notice
32
Energy Saving Control Function
To reduce power consumption when idle, the device comes equipped with a power management function that
automatically shifts to "Sleep" to minimize power consumption after a certain period of time has passed since the
device was last used.
➡ Sleep (page 85)
➡ Power Off Timer (page 86)
Automatic 2-Sided Print Function
This device includes 2-sided printing as a standard function. For example, by printing two 1-sided originals onto a
single sheet of paper as a 2-sided print, it is possible to lower the amount of paper used.
➡ Duplex (page 351)
Printing in duplex mode reduces paper consumption and contributes to the conservation of forest resources.
Duplex mode also reduces the amount of paper that must be purchased, and thereby reduces cost. It is
recommended that machines capable of duplex printing be set to use duplex mode by default.
Resource Saving - Paper
For the preservation and sustainable use of forest resources, it is recommended that recycled as well as virgin
paper certified under environmental stewardship initiatives or carrying recognized ecolabels, which meet EN
12281:2002* or an equivalent quality standard, be used.
This machine also supports printing on 64 g/m
2
paper. Using such paper containing less raw materials can lead
to further saving of forest resources.
* : EN12281:2002 "Printing and business paper - Requirements for copy paper for dry toner imaging processes"
Contact your dealer or service representative for recommended paper types.
Environmental benefits of "Power Management"
To reduce power consumption when idle, this machine is equipped with a power management function that
automatically activates energy-saving mode when the machine is idle for a certain period of time.
Although it takes the machine a slight amount of time to return to READY mode when in energy-saving mode, a
significant reduction in energy consumption is possible. It is recommended that the machine be used with the
activation time for energy-saving mode set to the default setting.