Kyocera FS-C5400DN User Manual

Handling Paper 3-11
Thick Paper
Fan the stack of paper and align the edges before loading them in the MP
tray. Some types of paper have rough edges on the back (those are
created when the paper is cut). In this case, put the paper on a flat place
and rub the edges once or twice with, for example, a ruler to smooth them.
Feeding rough edged paper may cause paper jams.
Colored Paper
Colored paper should satisfy the same conditions as white bond paper,
refer to Paper Specifications on page 3-2. In addition, the pigments used
in the paper must be able to withstand the heat of fusing during the
printing process (up to 200 °C or 392 °F).
Preprinted Paper
Preprinted paper should satisfy the same conditions as white bond paper,
refer to Paper Specifications on page 3-2. The preprinted ink must be
able to withstand the heat of fusing during the printing process, and must
not be affected by silicone oil. Do not use paper with any kind of surface
treatment, such as the type of paper commonly used for calendars.
Recycled Paper
Select recycled paper that meets the same specifications as the white
bond paper except for whiteness, refer to Paper Specifications on page
3-2.
Coated Paper
Coated paper is created by treating the surface of the base paper with a
coating that provides higher printing quality than plain paper. Coated
paper is used for particularly high quality printing.
The surface of high-quality or medium-quality paper is coated with special
agents that improve ink coverage by making the paper surface smoother.
These agents are used either to coat both sides of the paper or just one
side. The coated side appears slightly glossy.
Note If the paper jams
even after you smooth
it out, load the paper in
the MP tray with the
leading edge raised up
a few millimeters as
shown in the
illustration.
Note If you use thick paper quite often, we recommend to use
optional paper feeder PF-510.
Note Before purchasing recycled paper, test a sample on the
machine and check that the printing quality is satisfactory.

Kyocera FS-C5400DN Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	9600 x 600 DPI
Time to first page (black, normal)	8 s
Time to first page (color, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Maximum internal memory	1280 MB
Sound power level (standby)	36, 36.1 dB
Sound pressure level (printing)	52.1, 55 dB
Total output capacity	500 sheets
Maximum print size	216 x 297 mm
Paper tray media types	Envelopes, Plain paper, Recycled paper
Paper tray media weight	60 - 220 g/m²
Non-ISO print media sizes	Letter
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Network ready	No
Mobile printing technologies	-
Compatible operating systems	Mac OS X 10.2, UNIX, LINUX
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	91 W
Power consumption (printing)	608 W
Power consumption (PowerSave)	10 W
Display	LCD
Certification	GS, TÜV, CE
Product color	Gray
Maximum duty cycle	150000 pages per month
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	518 mm
Width	345 mm
Height	510 mm