• The use of accessories not recommended by the manufacturer may result in re, electric shock or personal injury.
• Do not let the cord hang from tables or counters. Do not pull the plug out by the cord and do not touch it with wet hands.
4. INSTALLATION
Note: There may be traces of coee in the machine as a result of Manufacturer tesng
conducted to guarantee the maximum quality of the product. Before starng up the machine
for the rst me, the component parts must be cleaned carefully. For more details see the re-
levant paragraph
We recommend that the packaging be kept for subsequent moves or transport.
- Remove the appliance from the packaging.
- Make sure that the machine rests on a at and stable surface.
- Remove the tank and clean the interior, then ll it with fresh water.
- Connect the plug to the socket only aer verifying that the electrical system complies with safety regulaons and that it is
earthed.
- Press the main switch on the front of the machine.
- Before the denive start-up for consumpon prepare a coee and dispose of it and run a hot water cycle to clean the internal
circuits.
Electrical connection
Warning: Electric current can be dangerous! Therefore, always follow the safety rules
scrupulously. Never use defecve wires.
The appliance’s operang voltage has been set at the factory. Check that the mains voltage corresponds to the indicaons on
the technical data plate.
Before connecng the machine to the mains, make sure that both buons are not pressed. Insert the plug into a suitable socket
23
To Next Page
Loading...
Need help?
General
