TROUBLESHOOTING
PROBLEM SOLUTION
The machine does not turn on. Check that the machine is connected to the mains.
It is not possible to insert the pod. Check that the pod is compable.
Check that you have lied the lever properly.
The coee is cold Heat the cups.
Wait unl the machine temperature light turns o
before brewing the coee.
The machine does not brew coee Check that there is water in the tank.
Check that the tube is inserted in the tank and that
it is not compressed.
Check that there is a pod in the machine.
Leaks water The coee gasket (indicate the appropriate reference in the
drawing) may be broken and must be replaced, or it could be
inserted incorrectly. To check it, put your nger (with the
machine cold) under the seal and check the enre
circumference well.
Il caè scende velocemente Adjust the upper pod holder and turn it to the le unl
the lever with the inserted pod ghtens the pod rmly.
Le guarnizioni si rompono spesso Remind users not to leave the used pod inside aer making
coee. Otherwise each me the old pod is removed it will
create some fricon and the gasket will wear out easily
For problems not covered by the aforemenoned table or if the suggested remedies do not resolve
them, contact the retailer.
29
To Next Page
Loading...
Need help?
General
