11
Your IntelliCold® pharmacy refrigerator is now set up and ready to use once it has had 24 hours
of cooling.
Before loading and using for the rst time, make sure that you reset your
minimum/maximum (Hi/Lo) temperature readings
Touch the tick icon/button to access the function and the controller will show the high/low
temperature parameters for each probe.
Viewing Alarm Limits
You can view the factory set alarm parameters or limits. These limits ensure that you are alerted
should your pharmaceuticals experience temperatures outside those recommended by the
Green Book, Chapter 3 page 27 and you cannot change them. Should you need them to be
altered please contact our service team on 01256 705 580 or email service@labcold.com.
To view the parameter, access the menu by holding the two arrow icons/buttons and scroll
through the options until you come to screen Lt.
Reviewing the Date
To review or change the date/time enter the menu by holding the two arrow icons/buttons
simultaneously and scroll through the menu until you get to the d-t screen.
Touch the tick icon/button to access the function and use the tick icon/button to view the
year, month, day etc .If you want to change any of the settings, use the arrow icons/buttons
to change the number and hold the tick icon/button to confirm the change as described on
pages 4 and 5.
Changing the date/time may lead to data stored by the controller being overwritten.
We recommend that once the date/time is set it should not be altered unless absolutely
necessary, for example if the controller experiences a power issue and batteries aren’t tted.
If you are going to use the Micro SD card function, make sure you have downloaded the
latest data before adjusting the date or time.
To Next Page
Loading...
Need help?
General
