Edition 3 April 2012 Mars/Mars Pro Service Manual
Page 30/59
7.3.1 LIGHT Sub menu
exit.
Enter the time required for UV light irradiation (if fitted) and Press ENTER to store and exit.
7.3.2 SET WATCH sub menu
● Press ENTER ● to exit back to USER MODE -SET WATCH menu and enter time
then press ENTER
● to exit to main menu.
7.3.3 DISPLAY MODEL menu
This allows the model name to be displayed in the screen.
Enter and select model, in this cars MARS, and enter to exit back to main menu.
7.3.4 FAN AUTOSTART/AUTOSTOP menu
This menu allows the fans to start up and stop at a pre set time every day.
Enter and select AUTO or OFF. If AUTO is selected then fans will start/stop at time selected on sub menu.
Enter submenu to select full speed or reduced speed at startuu.
Enter submenu to select days in week to startup automatic.
7.3.5 SERVICE sub menu
This sub menu cannot be accessed without inputting a code. This code is factory set to either 1234 or
8899.
Input the code using the appropriate buttons on the control panel and press ENTER ●.
The SERVICE sub menu has the following further sub menus for service use only:
7.3.5.1 MODEL service sub menu
service menu.
7.3.5.2 RESET service sub menu
Select ▲ or ▼ for YES / NO to reset all cabinet settings to factory settings default.
To Next Page
Loading...
Need help?
General
