141
9 Appendix
9.26 Technical Data
Power supply from 115 V - 15% to 230 V +10% 50/60 Hz
To be used only in a grounded power line network!
Power
Consumption
approx. 50 VA
Ambient
Temperature
normal operation: + 0 °C … + 60 °C
transport and storage: -25 °C … + 60 °C
Display alphanumeric display, 2 rows with 16 digit each
Permissible
Ambient Humidity
class F, DIN 40 040
Protection Class IP 54 (with sealing against cabinet door), otherwise IP 20
In- and Outputs 14 digital inputs 24V
16 analogue outputs 230V
1 analogue output (ETAMATIC S)
3 analogue inputs - all non-floating
Digital Signal
Inputs
The parasitic capacitance of the lead connected to the digital inputs may not exceed 2.2μF as
a result of the ETAMATIC self-tests. The lead length should be limited to 100 m. Since the dig-
ital inputs are for 24V DC, suitable contacts for that voltage should be used (hard silver or gold-
plated)
Regular Firing Rate
Input
• via internal burner-firing-rate controller actual value
• manual operating is possible via three-point.step signal
• external burner-firing-rate controller (0/4 ... 20 mV)
Feedback Inputs Potentiometer 5k or current signal 0/4 … 20 mA (ETAMATIC S channel 1)
Optional: Direct switching of NAMUR transmitter (ETAMATIC S)
Control Outputs 4
Resolution 999 digit, 10 bit
Three-point-step Running time of the actuating drives: 30s...60s
Possible servomotors:
6 Nm 60 sec. running time to 90° Type: 662R2127
19 Nm 60 sec. running time to 90° Type: 662R2111/N
30 Nm 60 sec. running time to 90° Type: 662R2112
40 Nm 60 sec. running time to 90° Type: 662R2121
To Next Page
Need help?
General
