WiBox2100E User Guide 8
1
1
:
:
U
U
s
s
i
i
n
n
g
g
T
T
h
h
i
i
s
s
G
G
u
u
i
i
d
d
e
e
Purpose and Audience
This guide provides the information needed to configure, use, and update the WiBox.
It is for network administrators, system integrators, and those responsible for
installing and maintaining the WiBox2100E.
Chapter Summary
The remaining chapters in this guide include:
2: Introduction
Describes the main features of the WiBox and the protocols it
supports.
3: Quick Start
Describes the steps to the physical installation and initial
configuration of the WiBox.
4: Web-Manager
Details using the Web-Manager to set parameters such as port
and server properties.
5: Telnet or Serial Port (Setup
Mode) Configuration
Provides instructions for accessing Setup Mode (command line
interface) using a Telnet connection through the network or a
terminal or terminal emulation program through the serial port.
6: Setup Mode: Server
Configuration
Details the network (server) settings
7: Setup Mode: Channel
Configuration
Details the serial port settings.
8: Setup Mode: Advanced
Settings
Details expert and security settings and explains how to reset the
unit to default values.
9: Monitor Mode
Provides instructions for accessing and using the command line
interface for monitoring the network and diagnosing problems.
10: Updating Firmware
Provides instructions for obtaining the latest firmware and updating
the WiBox.
11: Wireless Bridging
Provides information on the WiBox wireless bridging feature, which
will be available for WiBox2100E with firmware version 6.2 or later.
12: Troubleshooting
Describes common problems and error messages and how to
contact Lantronix Technical Support.
A: Binary to Hexadecimal
Conversions
Provides instructions for converting binary numbers to
hexadecimals.
Compliance
Warranty
To Next Page
Loading...
Need help?
General