Leica Lino L4P1 User Manual

Safety instructions
Prohibited use
l Using the product without instruction
l Using outside the stated limits
l Deactivation of safety systems and
removal of explanatory and hazard labels
l Opening of the equipment by using tools
(screwdrivers, etc.)
l Carrying out modification or conversion
of the product
l Deliberate dazzling of third parties; also in
the dark
l Inadequate safeguards at the surveying
site (e.g. when measuring on roads, con-
struction sites, etc.)
Hazards in use
WARNING
Watch out for erroneous measurements if the
instrument is defective or if it has been dropped or
has been misused or modified. Carry out periodic
test measurements. Particularly after the instru-
ment has been subject to abnormal use, and
before, during and after important meas-
urements.
CAUTION
Never attempt to repair the product yourself. In
case of damage, contact a local dealer.
WARNING
Changes or modifications not expressively
approved could void the user´s authority to oper-
ate the equipment.
Limits of use
Refer to section Technical data. The instru-
ment is designed for use in areas per-
manently habitable for humans. Do not use
the product in explosion hazardous areas or
in aggressive environments.
Leica Lino L4P1
16

Leica Lino L4P1 Specifications

General

Type	Line/Point level
Certification	IEC60825-1:2014
Product color	Grey, Red
Tripod thread	1/8, 1/4, 5/8 \
International Protection (IP) code	IP54
Laser class	2
Laser diode	635 nm (\u003C 5 mW)
Maximum range	15 m
Color of laser beam	Red
Leveling accuracy (±)	0.2 mm/m
Self-leveling range (±)	3 °
Battery type	AA
Operating time	24 h
Battery voltage	1.5 V
Number of batteries supported	4
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	-10 - 50 °C

Weight and Dimensions

Width	125 mm
Height	162 mm
Weight	1170 g