2
CAUTION
As with any mechanical equipment, contact
with sharp sheet metal edges can result in
personal injury. Take care while handling this
equipment and wear gloves and protective
clothing.
IMPORTANT
Frequent changes to operating mode may
cause system malfunctions. Allow at least
one minute between mode changes to allow
the system to stabilize.
General
The M0STAT120L-1 is a wired non-programmable
local controller for mini-split indoor units with
convenient timed schedules for daily operation.
These instructions are intended as a general
guide and do not supersede local codes in any
way. Consult authorities having jurisdiction
before installation.
Requirements
Be sure that power supply to the indoor unit has
been disconnected before beginning installation.
This controller should be used only as described
in this manual.
Do not install the controller on outside walls
(where there is unconditioned space on opposite
side of wall) or in locations where direct sunlight
may be present.
Shipping and Packing List
Package 1 of 1 contains the following:
Item Qty
Wired Controller 1
Installation and User Information
Guide
1
Screws for securing back plate to
drywall (M4X20)
3
Drywall anchors for securing back
plate
3
5-pin cable assembly 1
5-pin extension cable assembly -
20 Feet (6 meters)
1
Ground screw with washer (M4x8) 1
To Next Page
Loading...
Need help?
General
