EasyManuals Logo
Home>Lennox>Furnace>ML193UH

Lennox ML193UH User Manual

Lennox ML193UH
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
ML193UH / Page 7
SPECIFICATIONS
Gas
Heating
Performance
Model No. ML193UH110P48C ML193UH110P60C ML193UH135P60D
1
AFUE 93% 93% 93%
Input - Btuh 110,000 110,000 132,000
Output - Btuh 104,000 104,000 124,000
Temperature rise range - °F 50 - 80 40 - 70 45 - 75
Gas Manifold Pressure (in. w.g.)
Nat. Gas / LPG/Propane
3.5 / 10.0 3.5 / 10.0 3.5 / 10.0
High static - in. w.g. 0.50 0.50 0.50
Connections
in.
Intake / Exhaust Pipe (PVC) 2 / 2 2 / 2 2 / 2
Gas pipe size IPS 1/2 1/2 1/2
Condensate Drain Trap (PVC pipe) - i.d. 1/2 1/2 1/2
with eld supplied (PVC coupling) - o.d. 3/4 3/4 3/4
Indoor
Blower
Wheel nom. dia. x width - in. 10 x 10 11 ½ x 10 11 ½ x 10
Motor output - hp 1/2 1 1
Tons of add-on cooling 3 - 4 4 - 5 4 - 5
Air Volume Range - cfm 850 - 2030 1210 - 2525 1340 - 2800
Electrical
Data
Voltage 120 volts - 60 hertz - 1 phase
Blower motor full load amps 8.2 11.5 11.5
Maximum overcurrent protection 15 15 15
Shipping Data lbs. - 1 package 155 161 178
NOTE - Filters and provisions for mounting are not furnished and must be eld provided.
1
Annual Fuel Utilization Efciency based on DOE test procedures and according to FTC labeling regulations. Isolated combustion system rating for non-weatherized
furnaces.
INSTALLATION CLEARANCES - INCHES (MM)
Sides
1
0 inches (0 mm)
Rear 0 inches (0 mm)
Top/Plenum 1 inch (25 mm)
Front 0 inches (0 mm)
Front (service/alcove) 24 inches (610 mm)
Floor
2
Combustible
NOTE − Air for combustion must conform to the methods outlined in the National Fuel Gas Code (NFPA 54/ANSI−Z223.1)
or the National Standard of Canada CAN/CSA−B149.1 Natural Gas and Propane Installation Code”.
NOTE − In the U.S. ue sizing must conform to the methods outlined in the current National Fuel Gas Code (NFPA 54/
ANSI−Z223.1) or applicable provisions of local building codes. In Canada ue sizing must conform to the methods
outlined in National Standard of Canada CAN/CSA−B149.1.
1
Allow proper clearances to accommodate condensate trap and vent pipe installation.
2
Do not install the furnace directly on carpeting, tile, or other combustible materials other than wood ooring.

Other manuals for Lennox ML193UH

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lennox ML193UH and is the answer not in the manual?

Lennox ML193UH Specifications

General IconGeneral
BrandLennox
ModelML193UH
CategoryFurnace
LanguageEnglish

Related product manuals