Chapter 3 Reference information 3-1
Reference information
This section contains monitor specifications, instructions to manually install the monitor driver,
troubleshooting information, and service information.
Monitor specifications
Table 3-1. Monitor specifications
Dimensions Height
Depth
Width
454.4 mm (17.89 in.)
209.5 mm (8.25 in.)
614.1 mm (24.18 in.)
Stand Tilt range Range: -5°/+22°
VESA mount Supported
(UL & GS approved)
100 mm (3.94 in.)
Image Viewable image size
Maximum height
Maximum width
Pixel pitch
685.8 mm (27 in.)
336.3 mm (13.24 in.)
597.8 mm (23.53 in.)
0.311 mm (0.0122 in.) (V)
Power input Supply voltage
Max supply current
100-240 VAC, 60/50 Hz
1.5 A
Power consumption Max Consumption
Typical Consumption
Standby/Suspend
Off
28 W
20 W
0.5 W
0.3 W
Video input (Analog) Input signal
Horizontal addressability
Vertical addressability
Clock frequency
VGA
1920 pixels (max)
1080 lines (max)
170 MHz
Video input (Digital) Input signal
Horizontal addressability
Vertical addressability
Clock frequency
HDMI
1920 pixels (max)
1080 lines (max)
190 MHz
Communications VESA DDC CI
Aspect Ratio Size ratio 16:9
Altitude Test Operation 40000 ft
Supported Display Modes
(VESA Standard modes
between noted ranges)
Horizontal frequency
Vertical frequency
Native Resolution
30 kHz – 85 kHz
48 Hz – 75 Hz
1920 x 1080 at 60 Hz
Temperature Operating
Storage
Shipping
0° to 40°C (32°F to 104° F)
-20° to 60°C (-4°F to 140° F)
-20° to 60°C (-4° F to 140° F)
Humidity Operating
Storage
Shipping
10% to 80%
5% to 95%
5% to 95%