Figure 34. Removing the VESA mount bracket cover
Figure 35. Installing the VESA mount bracket cover
7. Reinstall the removed parts.
8. Place the computer in an upright position.
9. If a locking device is available, use it to lock the computer.
10. Reconnect the external cables and power cords to the corresponding connectors on the computer.
VESA mount bracket
Prerequisite
Before you start, read Appendix A “Important safety information” on page 83 and print the following
instructions.
Replacement procedure
1. Remove the computer stand. See “Computer stand” on page 48.
2. Remove the rear cover. See “Rear cover” on page 52.
Chapter 7. CRU replacement 63
To Next Page
Loading...
Need help?
General